Volgaflex Inks

Volgaflex Inks

The Water Based Flexo Inks

Volgaflex water based colored Flexo Inks are available in 18 vibrant colors. These are non hazardous and eco-friendly inks specially developed for corrugated box, duplex board.

Volgaflex inks are sufficiently pigmented for higher opacity on dark background.

Volgaflex allows the printer to get the full and sharp dot gain to the best productivity of printing department.

Following shades are available in Volgaflex;

  • 1851 Volgaflex White
  • 1853 Volgaflex Golden Yellow
  • 1854 Volgaflex Orange
  • 1855 Volgaflex Deep Red
  • 1857 Volgaflex Bright Red
  • 1858 Volgaflex Crimson Red
  • 1845 Volgaflex Peacock Blue
  • 1864 Volgaflex Navy Blue
  • 1865 Volgaflex Dark Blue
  • 1866 Volgaflex Oxford Blue
  • 1867 Volgaflex Royal blue
  • 1868 Volgaflex Violet
  • 1869 Volgaflex Magenta
  • 1870 Volgaflex Jaipur Magenta
  • 1880 Volgaflex Viridine Green
  • 1881 Volgaflex Deep Green
  • 1885 Volgaflex Brown
  • 1895 Volgaflex Black
  • 1899 Volgaflex Dense Black

Additives

1810 Volgaflex Defoamer

It is a semi opaque liquid to suppress foam during long run. Foaming will affects ink transferability which produces dull prints. It is advisable to use R.O water/ Demi water or Atlas ink reducer only.

1813 Volgaflex Retarder

It will retard drying time of an ink during summer.

1811 Volgaflex
Buffer

Buffer addition is recommended when pH of an ink lowers under 7. pH is a very important factor of a water based ink.

1812 Volgaflex Tack Reducer

Tack reducer is added when paper stick to the stereo. It reduces stickiness of an ink. Addition level is 2%-3% of an ink.

Stability

A very high stable ink maintains  the  sharpness,  smoothness,  as  well  as printability after long press run.

Volgaflex inks can be cleaned easily with water..

Notes: Customer shall maintain original prints for the purpose of verification of post check results.

Volgaflex will show about 85-95%close performance for various batches.

Viscosity

Inks are supplied to generally meet the requirement for desired print quality. However, variation due to atmospheric conditions at the users end one may need to adjust the viscosity for the requirement of efficiency of printing. Printer may add R.O water/Demi water or Atlas ink reducer up to 5%-7%. Addition of more R.O water/Demi water or Atlas ink reducer may cause poor sharpness, reduce colour strength and also separation on pigment from ink.

Important Tips

Ink storage
Store at proper temperature (35 ± 5° C). Higher temperature may affects ink stability.
Wash up

After printing job is done, rubber roll/anilox and stereo must wash immediately for next run. Do not mix washed water with ink.

Disclaimer

While ATLAS CHEMICAL CO. believes that the data contained herein are factual and opinions expressed are those qualified experts regarding the results of the test conducted, the data are not to be taken as a warranty or representation for which ATLAS CHEMICAL CO. assumes legal responsibilities. They are offered solely for your consideration and verification. Always test ink before use on the surface to be tested.

Our Products
Troubleshooting
Read
Brochures
Download
Inquiry
Inquiry Now