Volgalab Inks

Volgalab Inks

The Water Based Flexo Inks For Label

Volgalab water based  colored  Flexo Inks are available in 09 vibrant colors . These  are non hazardous and ecofriendly inks specially developed for label/metalized paper etc .

Volgalab inks are sufficiently pigmented for higher opacity on dark background

Volgalab allows the printer to get the full and sharp dot gain to the best productivity of  Printing  department.

Following shades are available in Volgalab  ;

  • 1411 Volgalab Process Yellow
  • 1414 Volgalab Process Magenta
  • 1416 Volgalab Process Cyan
  • 1420 Volgalab Black
SPOT COLOURS
  • 1451 Volgalab White
  • 1454 Volgalab Orange
  • 1456 Volgalab Bright Red
  • 1467 Volgalab Royal Blue
  • 1499 Volgalab Dense Black

Additives

1410 Volgalab Defoamer

It is a semi opaque liquid to suppress foam during long run. Foaming will affects ink transferability which produce dull prints. It is advisable to use R.O water/ Demi water or Atlas ink reducer only.

1413 Volgalab Retarder

It will retard drying time of an ink during summer.

1411 Volgalab Buffer

Buffer addition is recommended when pH of an ink lowers under 7. pH is a very important factor of a water based ink.

1412 Volgalab Tack Reducer

Tack reducer is added when paper stick to the stereo. It reduces stickiness of an ink. Addition level is 2%-3% of an ink.

Stability

A very  high stable  ink maintains  the  sharpness,  smoothness,  as  well  as printability after long press run.

Volgatis inks can be cleaned easily with water ..

Notes : Customer shall maintain original prints for the purpose of verification of post check results.

Volgatis will show about 85-95%close performance for various batches.

Viscosity

Inks are supplied to generally meet the requirement for desired print quality. however , variation due to atmospheric conditions at the users end one may need to adjust the viscosity for the requirement of efficiency of printing. Printer may add R.O water/Demi water or Atlas ink reducer up to 5%-7% . Addition of more R.O water/Demi water or Atlas ink reducer may cause poor sharpness, reduce colour strength and also separation on pigment from ink.

Important Tips

Ink storage

Store at proper temperature (35 ± 5° C) . Higher temperature may affects ink stability.

Wash up

After printing job is done,  rubber roll/anilox and stereo must wash immediately for next run. Do not mix washed water with ink.

Disclaimer

While ATLAS CHEMICAL CO. believes that the data contained herein are factual and opinions expressed are those qualified experts regarding the results of the test conducted, the data are not to be taken as a warranty or representation for which ATLAS CHEMICAL CO. assumes legal responsibilities. They are offered solely for your consideration and verification. Always test ink before use on the surface to be tested.

Our Products
Troubleshooting
Read
Brochures
Download
Inquiry
Inquiry Now