Volgarull Inks

Volgarull Inks

The Rulling Inks

Volgarull waterbased rulling inks:

Volgarull water based colored Rulling Inks are available in 08 vibrant colors. These are non hazardous and eco-friendly inks specialy developed for high speed rulling machine.

Volgarull inks are sufficiently pigmented for higher brightness for white background

Volgarull allows the printer to get the full and sharp line to the best productivity of printing department.

Following shades are available in Volgarull;

  • 1872 Volgarull Red
  • 1873 Volgarull Red YL
  • 1874 Volgarull Bright Red
  • 1875 Volgarull Magenta
  • 1876 Volgarull Deep Magenta
  • 1877 Volgarull Green
  • 1878 Volgarull Violet
  • 1882 Volgarull Black
  • 1871 Volgarull Ocean Blue

Additives

2810 Volgarull Defoamer

It is a semi opaque liquid to suppress foam during long run. Foaming will affects ink transferability which produce dull prints. It is advisable to use R.O water/ Demi water or Atlas ink reducer only.

1813 Volgarull Retarder

It will retard drying time of an ink during summer.

1811 Volgarull
Buffer

Buffer addition is recommended when pH of an ink lowers under 7. pH is a very important factor of a water based ink.

1812 Volgarull Tack Reducer

Tack reducer is added when paper stick to the stereo. It reduces stickiness of an ink. Addition level is 2%-3% of an ink.

Stability

A very high stable ink maintains the sharpness, smoothness, as well as printability after long press run.

Volgarull inks can be cleaned easily with water..

Notes: Customer shall maintain original prints for the purpose of verification of post check results.

Volgarull will show about 85-95%close performance for various batches.

Viscosity

Inks are supplied to generally meet the requirement for desired print quality. However, variation due to atmospheric conditions at the users end one may need to adjust the viscosity for the requirement of efficiency of printing. Printer may add R.O water/Demi water or Atlas ink reducer up to 5%-7% . Addition of more R.O water/Demi water or Atlas ink reducer may cause poor sharpness, reduce colour strength and also separation on pigment from ink.

Important Tips

Ink storage

Store at proper temperature (35 ± 5° C). Higher temperature may affect ink stability.

Wash up

After printing job is done, rubber roll/anilox and stereo must wash immediately for next run.

Dilution

Dilution with R.O water is recommended for good result.

Disclaimer

While ATLAS CHEMICAL CO. believes that the data contained herein are factual and opinions expressed are those qualified experts regarding the results of the test conducted, the data are not to be taken as a warranty or representation for which ATLAS CHEMICAL CO. assumes legal responsibilities. They are offered solely for your consideration and verification. Always test ink before use on the surface to be tested.

Our Products
Troubleshooting
Read
Brochures
Download
Inquiry
Inquiry Now